Filter
Top Products
2
(3) Train all personnel who will use the steamer. Make sure personnel know how to operate the
steamer, clean the interior and exterior, drain the unit, and descale the steam generator.
(4) Operating personnel must be able to recognize problems, and report them so that corrective
actions can be taken by trained personnel as outlined in the troubleshooting charts found in the
back of this manual and in the separate Installation and Maintenance Manual.
(5) Conduct regular steamer inspections. Check for water line leaks, door seal and drain leaks,
clogged drain, steam generator scale buildup, and steamer control malfunctions.
(6) Follow the instructions for steamer maintenance found in this manual and the additional literature
provided with the steamer.
(7) Before each use of the steamer, inspect the drain and screen for blockage. Inspect the door
gasket assembly, and slide racks for proper installation and cleanliness.
(8) Allow only Cleveland Range authorized service representatives to service the steamer.
(9) Use only factory authorized repair parts.
(10) Maintain written records of steamer maintenance and service. Each record should include at
least:
•
The date of the service or maintenance.
•
A description of the service, maintenance or repair performed. Include part numbers if
applicable.
•
Copies of purchase order(s) and invoice(s) for repair parts and service.
•
The name and signature of the person performing the maintenance or service.
B. Product Information
(1) Serial Number
The Serial number is located at the back of the unit. During manufacture, SteamCraft
Steamers are assigned individual serial numbers. Whenever any inquiry is made with
Cleveland Range regarding a steamer the serial number should be referenced.
(2) Model Number
This manual covers model numbers 21CET8, 21CET16 and 21CEA10.
(3) Product Information Plate
The Product Information Plate located on the rear (Model 21CET8 and 21CET16) or the left
side (Model 24CEA10) of the unit lists the model and serial number as well as the power
supply and the wiring requirements of the steamer.