Filter
Top Products
One Conair Drive ● Pittsburgh, PA 15202 ● 412-312-6000 ● FAX 412-312-6227 ● www.conairnet.com
MODELS WSB122 WSB131 WSB140
Performance characteristics
Batch size lbs {g} 2.2 {1000} 2.2 {1000} 2.2 {1000}
Maximum throughput lbs/hr {kg/hr}* 200 {91} 280 {128} 450 {204}
Bin capacity - main ingredient ft
3
{liter} 1.0 {28.3} 1.0 {28.3} 1.0 {28.3}
Bin capacity - minor ingredient ft
3
{liter} 1.0 {28.3} 1.0 {28.3} 1.0 {28.3}
Maximum number of materials 4 4 4
Number of discharge valves 2 3 4
Number of micro pulsing valves 2 1 0
Control software (# of components) 4 or 12 4 or 12 4 or 12
Dimensions inches {mm}
A - Height above mounting plate
†
38.9 {989.6} 38.9 {989.6} 38.9 {989.6}
B - Width 33.2 {843.3} 33.2 {843.3} 33.2 {843.3}
C - Width R (removable bins) 30.2 {766.3} 30.2 {766.3} 30.2 {766.3}
D - Depth 31.4 {797.6} 31.4 {797.6} 31.4 {797.6}
E - Controller height 11.25 {285.75} 11.25 {285.75} 11.25 {285.75}
F - Controller width 12.25 {311.15} 12.25 {311.15} 12.25 {311.15}
G - Controller depth 8.19 {208.03} 8.19 {208.03} 8.19 {208.03}
Weight lbs {kg}
Installed 200 {90.7} 200 {90.7} 200 {90.7}
Shipping 300 {136.1} 300 {136.1} 300 {136.1}
Voltage Total amps
120V/1 phase/50-60 hz 2.0 2.0 2.0
240V/1 phase/50-60 hz 1.0 1.0 1.0
Compressed air requirements
Discharge valves 60 psi @ 0.2 ft
3
/min { 4.1 bars @ 0.09 liters/sec}; 1/4 in. NPT fitting
Micro pulsing valves 60 psi @ 0.2 ft
3
/min { 4.1 bars @ 0.09 liters/sec}; 1/4 in. NPT fitting
GRAVIMETRIC BATCH BLENDERS
WSB 100 and 100R Models
MOUNTING INTERFACE
SPECIFICATION NOTES:
R model has removable bins with verti-
cal valves.Removable bins can sup-
port an 8-inch loader or vacuum
receiver. Stationary bins can support a
12-inch loader or vacuum receiver.
Maximum throughput for a 140R model
is 437 lb/hr {198.2 kg/hr}. Minor ingre-
dient bin capacity is 0.7
ft
3
{19.8 liter}.
* Throughput rates are based on bins
with each micropulsing valve dis-
pensing no more than 1% colorant
and/or additive material.
†
The optional flow control valve adds
3.5 in. {88.9 mm} to total height.
(4) 9/16 in.
{14.3 mm}
diameter
bolt holes
3 in. {76.2 mm}
diameter
through hole
8 in. {203.2 mm}
square
bolt pattern
10 in.
{254 mm}
square
SPECIFICATIONS
TPBS001/0700
IB04
D
A
B
Side View
Front View
1
2
3
4
D
B
Top View
D
A
C
Side View, R Model
Front View, R Model
1
2
3
4
D
C
Top View, R Model
CONTROL
APPENDIX B