Filter
Top Products
Version 1.0 Page 26
INSTALLATION / FREESTANDING UNIT / DETAILS
LEG INSTALLATION / FREESTANDING UNIT / DETAILS
1. Locate the eight (8) bolts in the package that comes with the leg kit.
2. Bolt the four (4) legs to the bottom of the pellet stove using two bolts per leg for a total of eight
(8) bolts through the holes provided at the bottom corner of each unit.
3. Use the leveling bolts provided to level the pellet stove. The pellet stove should be level or
slightly declined from front to back. If this is not done, “bridging of pellets” may occur once
the stove is operated.
FIGURE 5: LEG INSTALLATION
PEDESTAL INSTALLATION
1. The pedestal is designed to be mounted to the bottom of the Little Rascal using the for corner
leg hole mounts. There is a wing on each side pf the pedestal for bolts to go through.
2. Position the pedestal and attach it with the four (4) bolts provided.
FIGURE 6: PEDESTAL INSTALLATION