Filter
Top Products
11
9. Wait until all the water has drained into
the brewer before lowering the brewer
handle completely.
10. The Brew button LED will remain on,
indicating the water is heating.
Note: If Brew button was not pressed
before you added water to the water
reservoir (Brew and Hot Water LEDs are
still flashing) you can do so after water has
drained into the brewer and the brewing
head is closed. The light will now stay on
until heating/brewing is complete.
11. After about 2 minutes, the beverage
starts to dispense.
Caution: there is very hot water
in the K-Cup
®
chamber during
the brewing process. To avoid
risk of injury, do not lift the
handle or open the K-Cup
®
chamber during the brewing
process.
12. Lift the handle, then remove and
dispose of the used K-Cup
®
. Close the
brewing head.
Caution: K-Cup
®
will be hot.
13. Enjoy your cup of gourmet coffee! Your
brewer is ready to use again or you can
power it off.
Hot Water
Your brewer is equipped to dispense hot
water to make hot chocolate, tea, soup, and
more.
To make hot water:
14. Press the Power button.
15. Press the Hot Water button. Add Water
indicator will illuminate.
16. Lift the reservoir lid.
17. Pour water into the water reservoir until
it reaches up to the rim of your desired
fill level on the water level guide
(minimum 6 ounces). Close the lid.
18. Lift the brewer handle. Water starts to
drain from the water reservoir into the
brewer.
19. Place mug on the drip tray. The drip
tray can be removed to accommodate
travel mugs.
20. Wait until all the water has drained into
the brewer before lowering the brewer
handle completely.
21. The Hot Water button LED will remain
on, indicating the brewer is heating.
Note: If the Hot Water button was not
pressed before you added water to the
water reservoir (Hot Water and Brew LEDs
are still flashing) you can do so after water
has drained into the brewer and the brew
head is closed. The LED will now stay on
until heating/brewing is complete.
22. After about 2 minutes, hot water starts
to dispense.