Filter
Top Products
15
•
Once the vinegar is dispensed,
discard it into sink.
Step 2: Second Vinegar Rinse
•
Pour the remaining 10 ounces of vinegar
into the water reservoir.
•
Place the ceramic mug on the drip tray.
•
Lift the brewer handle, but do not add
a K-Cup
®
.
•
After all the vinegar has drained, lower
the brewer handle and press the Hot
Water button.
•
The Hot Water button will illuminate blue,
indicating the brewer is heating.
•
Power the brewer off as it starts to
dispense.
•
Allow brewer to sit for 30 minutes.
•
Power on the brewer, lift and lower
brewer handle, then press the Brew
button.
•
Once the vinegar is dispensed, discard
hot contents into sink.
Step 3: Fresh Water Rinse
• Repeatstep1threetimesusing
freshwater in place of vinegar
.
•
This will clean the brewer plumbing and
remove any residual vinegar taste. The
brewer is now ready for normal use.