Filter
Top Products
9
Setting Up Your Brewer
Initial Cleaning and First Brew
Perform an initial cleaning before
making your first beverage. Follow
these instructions but do not insert
a K-Cup
®
.
1. Plug the power cord into an
independent, grounded outlet. Press
the Power button to turn the unit on.
2. Press the Hot Water button. The Add
Water indicator will illuminate.
3. Lift the reservoir lid.
4. Pour water into the water reservoir until
it reaches the 10 oz. rim on the water
level guide. Close the lid.
5. Lift the brewer handle but do not add a
K-cup
®
. Water starts to drain from the
water reservoir into the brewer.
6. Wait until all the water has drained into
the brewer before lowering the brewer
handle completely.
7. Place mug on the drip tray.
8. The Hot Water button LED will remain
on, indicating that the water is heating.
After about 2 minutes, the water starts
to dispense.
9. The one-time cleaning process is
complete. Discard hot water. Your
brewer is ready to use.
Charcoal Water Filter
Your coffeemaker comes with a charcoal
water filter that eliminates chlorine, bad
tastes and odors from tap water.
Inserting the Water Filter
1. Remove the filter and filter holder from
the polybag.
2. Soak the filter, fully immersed in cold tap
water, for 15 minutes.
3. Rotate the water filter compartment
cover counterclockwise to remove the
charcoal water filter holder.