DeLonghi DMFPSII Oven User Manual


 
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS
After having unpacked the appliance, check to ensure that it is not damaged.
In case of doubt, do not use it and consult your supplier or a professionally qualified tech-
nician.
Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not
be left around within easy reach of children, as these may cause serious injuries.
Do not attempt to modify the technical characteristics of the appliance as this
may become dangerous to use.
Do not carry out cleaning or maintenance operations on the appliance without
having previously disconnected it from the electric power supply.
After use, ensure that the knobs are in the off position.
Do not allow children or other incapable people to use the appliance without
supervision.
During use the appliance becomes hot. Care should be taken to avoid touching
heating elements inside the oven.
Keep children away from the cooker when it is in use.
Some appliances are supplied with a protective film on steel and aluminium parts.
This film must be removed before using the appliance.
Fire risk! Do not store flammable material in the oven.
Make sure that electrical cables connecting other appliances in the proximity of
the oven become entrapped in the oven door.
Do not line the oven walls with aluminium foil. Do not place baking trays or the
drip tray on the base of the oven chamber.
The manufacturer declines all liability for injury to persons or damage to property
caused by incorrect or improper use of the appliance.
WARNING: Taking care NOT to lift the oven by the door handle.
IMPORTANT NOTE: This appliance shall not be used as a space
heater, especially if installed in marine craft or caravans.
This oven has been designed and constructed in accordance with the following codes
and specifications:
AS/NZS 3350-1 General Requirements for Domestic electrical appliances
AS/NSZ 3350-2-6 Particular Requirements for Domestic electrical cooking appliances
AS/NSZ 1044 Electromagnetic Compatibility Requirements.
4