Filter
Top Products
6
Air-2
EUROCHEF - PRO WALL HOOD
REMOVE THE RANGEHOOD
PARTS PROVIDED
Locate the parts packed with the hood.
no. 4 screws to fix duct transition (torx 20)
3,9 x 9,5 mm
no.3 screws and no.3 wall anchors
(Philips) M5 x 57 mm
Screws to hang and
secure hood to the
Wood Bracket
(torx 20)
4,5 x 20 mm
no. 4 for 24”-30”
no. 6 for 36”-48”
Parts Included with your Hood
• Hood with blower installed
• 12-Volt halogen bulbs, installed
• Care & Use /Installation Instructions
• Registration Card
• Filters (24” & 30” = 2; 36” = 3; 48” = 4)
• Grease trap (24” & 30” = 2; 36” = 3; 48” = 4)
• Transition with Back draft damper
• Fasteners
• Wooden bracket for Hood Support
Parts Not Included with your Hood
• Duct Cover Kit, 6" or 12" height
• Warming lamp kit
• Back Splash + Warming shelf kit
• Blower upgrade kit for 30” - 36” models only
• Recirculating kit
• See your dealer to purchase these kits
LOCATION OF
COMPONENTS
DO NOT GRAB BODY HERE
GRAB BODY
HERE
GRAB BODY
HERE
no. 4 screws 80mm to attach wood
bracket to wall studs (torx 25)
Wood bracket
Grease Trays
(2 with 24”, 30” models)
(3 with 36” models)
(4 with 48” models)
HARDWARE PACKAGE
Locate and check contents.
Screws shown actual size
Stainless Steel Grease Filters
(2 with 24”, 30” models)
(3 with 36” models)
(4 with 48” models)
Duct
Transition
Washers
no. 4 for 24”-30”
no. 6 for 36”-48”
for use with screws
to attach hood to
Bracket
Washers
no. 3 6 x 24
for use with
screws to
anchor hood