3
®
Before First Use
1. Remove all packing materials and literature.
2. Wash all removable parts in warm soapy water. Rinse
and dry all parts thoroughly. Wipe the water reservoir
with a clean damp cloth. NEVER immerse the water
reservoir in water or any other liquid. NEVER clean any
parts in a dishwasher.
How To Assemble
1. Make sure the unit is unplugged before assembling.
2. Place the base on a flat, level surface.
3. Position the turbo ring around the
heating element.
4. Fill the water reservoir with cold or
warm water to the max level. Use fresh
water with each use.
5. Position the drip tray over the water
reservoir. Whenever possible, use the
retained liquid in the drip tray for
making gravies, sauces, soups, etc.
6. Position the steaming baskets.
a) Place the food in the steaming baskets.
b) The baskets are labeled 1,2, and 3
for easy positioning.
c) Position basket 1 on the lower level,
2 on the middle level, and 3 on the
top level.
How To Operate
To set the digital clock:
1. Plug the steamer into a wall outlet. The display will
read 00:00.
2. Press the “Program” and On/Off buttons at the same
time. A beep will sound.
3. Increase or decrease the time by pressing the +/-
button. Note: the time will increase in 10 minute
intervals and decrease in 1 minute intervals.
Immediate Steam Mode:
1. Push the On/Off button until the display shows 45.
2. Set the steaming time by pressing the +/- buttons. The
time will change in 5 minute intervals. Press any button
to stop the procedure.
3. After the steaming time is set, the unit will sound for 2