Filter
Top Products
3
106706
OWNER’S MANUAL
For more information, visit www.desatech.com
PRODUCT
IDENTIFICATION
Install and use stove and burner system with
care. Follow all local codes. In the absence
to local codes, use the current National Fuel
Gas Code ANS Z223.1, also known as
NFPA 54* (USA) or the current CAN/CGA-
B149[.1 or .2] Installation Codes (Canada).
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
LOCAL CODES
PRODUCT
FEATURES
OPERATION
This B-vent freestanding stove with burner
system is clean burning and vents vertically.
Heat is generated by both realistic flames
and glowing embers. When used without
the blower accessory, the stove with burner
system requires no electricity making it
ideal for emergency backup heat.
PIEZO IGNITOR
This burner system has a piezo ignitor. This
system requires no matches, batteries, or
other sources to light burner system.
L
O
H
I
OFF
ON
Cast Iron
Stove Body
Piezo Ignitor
Control Valve
Log Set
Figure 1 - Sun Valley B-Vent Freestanding Fireplace Shown Installed in Approved Sun
Valley Cast Iron Stove Body Models MC Series Only
Blower with
Adjustment
Knob (Optional
Installation)
Lava Rock
Pilot Assy
Burner
Venting
System
Glass Door
Assembly
Glowing Embers
Grate Assembly
Rear Cover
Cast Iron
Stove Body
Draft Hood
Relief
Opening
ON/OFF Switch
(Opposite Side)