Filter
Top Products
Operating Instructions
15
3
If the only LED indicator illuminated is one that belongs to a pro-
gramme button, this means that this programme has been activated.
The Programme must be cancelled (RESET):
Press function buttons 2 and 3 simultaneously for approx. 1 second.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
4. Pressing function button 2 will change the setting.
5. Once the multi-display is indicating the required setting, press the ON/
OFF button.
The setting is now saved.
Adding rinse aid
If you are using dishwasher detergent and rinse aid separately, add the
rinse aid:
– Before using the dishwasher for the first time.
–When the
H indicator on the control panel is illuminated.
The rinse aid compartment is on the inside of the dishwasher door.
0 1. Open the door.
2. Press the rinse aid compartment
release button with your finger.
3. Fully open the rinse aid compartment
lid.
0d
Inflow of rinse aid is deactivated
1d
Inflow of rinse aid is activated (factory setting)