Filter
Top Products
Operating Instructions
35
After rectifying an Å10or Å20error, press the button for the com-
menced programme. The programme will continue.
If the fault is displayed again, please contact your local Service Force
Centre.
3
For all other errors displayed, please contact your local Service Force
Centre stating the error code (see chapter: Service and Spare Parts).
Two short continuously
repeated warning tones
can be heard; the pro-
gramme display for the
selected programme is flash-
ing; error code
Å20is dis-
played in the multi-display.
The siphon is blocked. Clean out siphon.
The water drain hose
has not been correctly
laid.
Check hose installation.
Three short continuously
repeated warning tones
can be heard, error
code
Å30is displayed in the
multi-display.
The leak prevention sys-
tem has been triggered.
Turn off the tap and contact
your local Service Force Cen-
tre.
Malfunction Possible cause Remedy