Filter
Top Products
Operating Instructions
17
Activating/deactivating the acoustic signal
The acoustic signal can indicate acoustically:
– at which water hardness the water softener is set.
– when a programme has finished.
– when an error has occurred with the dishwasher.
You can switch on/off the acoustic signal in the following way:
1. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
3
If the only LED indicator illuminated is one that belongs to a pro-
gramme button, this means that this programme has been activated.
The programme must be cancelled (RESET):
Press function buttons 2 and 3 simultaneously for approx. 1 second.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 3.
The multi-display will indicate the current setting:
4. Pressing function button 3 will change the setting.
5. Once the multi-display is indicating the required setting, press the
ON/OFF button. The setting is now saved.
0b
Acoustic signal deactivated
1b
Acoustic signal activated (ex-factory setting)