Filter
Top Products
21
C.1.2 FIRST START-UP AND TEMPERATURE ADJUSTMENT
The appliance has a main ON/OFF switch.
Switch the appliance on by pressing the ON/OFF button:
To set the compartment temperature, proceed as
follows:
- hold the bottom SET button down for 5 seconds
SET
The SET TEMPERATURE value will be displayed
The unit of measure light starts flashing.
- To change the set temperature, press the bottom SET button
or the top MANUAL DEFROST button within 15 seconds
SET
or
C.1.1 CONTROL PANELS (see fig. 1/2/3/4)
C.1.1.1 “Refrigerator” version control panel
1 - Access to button for food categories
2 - High humidity ON/OFF button
2a - High humidity light
3 - Service alarms button
3a - Service alarms warning light
4 - Top button: manual defrost
5 - Bottom button: Temperature setting
/ Category selection
6 - HACCP alarms button
7 - Display
8 - Compressor status light
9 - Power status light
10 - ON/OFF button
C.1.1.2 “Freezer” version control panel
1 - Access to button for food categories
2 - Service alarms button
2a - Service alarms warning light
3 - Top button: manual defrost
4 - Bottom button: Temperature setting
/ Category selection
5 - HACCP alarms button
6 - Display
7 - Compressor status light
8 - Power status light
9 - ON/OFF button
1
2a 3a
4
7
8 9
10653
2
1
2a 3
6
7
8
954
2
C.1 OPERATION and INSTRUCTIONS FOR
THE USER