Filter
Top Products
20
Setting the oven controls
CONTROL FEATURES
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
satisfactory use of your oven, become familiar with the various features and functions of
the oven as described below. Detailed instructions for each feature and function
follow later in this Use & Care Guide.
SELECTOR CONTROL KNOB- Use to select the
Bake, Convection Bake, Convection Roast, Broil or
Clean Feature.
Bake
Conv Bake
Conv Roast
Broil
Clean
-Lock
-Racks
BROIL—
Used to
select the
broil
function.
CONVECTION BAKE— Used to
select the Convection Bake feature.
CLEAN—
Used to
select the
Self-Cleaning
cycle.
CONVECTION
ROAST—
Used to select
the convection
roasting mode.
The oven can be set to bake at any temperature from 170° F to 550° F
To set the Bake Temperature to 350°F:
1. Arrange interior oven racks, place food in oven and close oven door.
2. Turn the selector control knob to Bake.
3. The corresponding indicator light will flash.
4. Turn the temperature control knob to 350. The indicator light will stop flashing and the
oven will begin to preheat.
A beep will sound once when temperature reaches 350°F.
The indicator light will stay on until the Selector or the Temperature knob is turned to the
Off position.
5. When baking is completed, turn the temperature and the selector control knobs to Off
position.
To change the Bake temperature (example changing from 350°F to 425°F):
1. After the oven has already been set at 350°F, and the oven temperature needs to be
changed to 425°F, turn the temperature control knob to 425°F. A beep will sound
when the oven temperature reaches 425°F.
BAKING
BAKE— Used to select
the bake function.
OVEN TEMPERATURE CONTROL
KNOB— Use to select the required
Bake, Convection Bake, Convection
Roast, Broil or Clean Temperature.
OVEN FUNCTION INDICATOR LIGHTS—
Used to indicate which function is used.
GETTING STARTED
When the unit is first plugged in, or when the power supply to the range has been interrupted,
the indicator lights will flash and the control will beep. To stop the lights from flashing, turn the
selector control knob to BAKE and back to OFF.