Filter
Top Products
7
BEFORE OPERATION
SETTING THE CLOCK
Plug in the oven.
1. The oven display will flash:
2. Press the STOP button, the display will show:
3. To set the clock, see below.
4. Heat the oven without food. (See page 17 note 2).
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
x1
1. Choose the clock function.
(12 hour clock).
Choose the 24 hour
clock.
3. Press the COOKING
MODE button to change
from hours to minutes.
4. Set the minutes. Rotate the
TIMER/WEIGHT/POWER
knob until the correct minute is
displayed (35).
5. Press the COOKING
MODE button to start
the clock.
2. Set the hours. Rotate the TIMER/WEIGHT/
POWER knob until the correct hour is
displayed (23).
x1 and hold for 3 seconds
x1
x1 x1
Example:
To set the 24 hour clock to 23:35.
There are two setting modes: 12 hour clock and 24 hour clock.
1.
To set the 12 hour clock, hold the COOKING MODE
button down for 3
seconds. will appear in the display.
2. To set the 24 hour clock, press the
COOKING MODE
button once more
after Step 1, in the example below will appear in the display.
x1 and hold for 3 secs.
To set the clock, follow the example below.
NOTES:
1. You can rotate the TIMER/WEIGHT/POWER
knob clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show after the power is reinstated.
If this occurs during cooking, the programme will
be erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
2. EX-72D UK ENGLISH 01/06/2004 08:33 Page 7