Filter
Top Products
13
The rinse-aid
The rinse-aid ensures brilliant crockery and also helps it to dry. It is automatically
added in during the hot rinsing cycle. The storage compartment built in to the inside
of the door can hold about 110 ml of rinse-aid, which will be sufficient for between
16 and 40 dishwashing programmes, according to the dosage setting.
Filling up the rinse-aid
1. Open the container by pressing the release button (A).
2. Add the rinse aid until the container is completely full. The maximum level for
filling is indicated by “max”.
Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess
foaming during the next wash.
Attention! Do not put liquid detergent in the rinse aid compartment.
Adjusting the dose
According to the finish and drying results obtained adjust the dose of rinse aid by
means of the 6 position selector (C) (position 1
minimum dosage, position 6 maximum dosage).
Use the tip of a screwdriver to rotate the selector.
The dosee is factory set in position 4.
Increase the dose if there are drops of water or
lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the
dishes.
BR07
BR14
BR09
152968 86/0en/UK 11-07-2003 14:44 Pagina 13