Filter
Top Products
30
Symptom Fault code Solution
The machine is noisy
●
Dishes are rattling against each other.
Refer to “Loading cutlery and dishes”.
●
The spray arms are knocking against
the dishes.
Refer to “Loading cutlery and dishes”.
The door is difficult
●
The dishwasher is not level, or not.
to close properly built-in.
Visible lime deposits or
●
Check that there is salt and that the
white film on the dishes salt cap is tight.
●
Check that the right level of the
water softener is set.
The dishes are not
●
The rinse aid has run out or too little
quite dry is being used.
The dishes are not clean
●
The baskets are too full.
(poor wash)
●
The dishes have not been arranged
properly.
●
The spray arms do not rotate.
●
The spray arms are clogged.
●
The filters are clogged.
●
The filters are not in right position.
●
Not enough detergent has been used
or it is unsuitable.
●
The detergent is too old or has gone
hard.
●
The salt container cap is not properly
closed.
●
The washing programme selected is
too gentle.
Once the checks have been carried out switch on the dishwasher and start a washing
programme, if the fault code reappears in the digital display, contact your local
Service Force Centre.
152968 86/0en/UK 11-07-2003 14:44 Pagina 30