Filter
Top Products
14
Top up the rinse aid when the rinse aid indicator light on the control panel
illuminates.
It is possible to deactivate the rinse aid indicator light (see the following
instructions).
By default the rinse aid indicator light is active.
To deactivate the rinse aid indicator light be sure that the
dishwasher is off and then proceed as follows:
1. Press function push buttons 1 and 2 programme push simultaneously.
2. While keeping the function push buttons 1 and 2 pressed, switch on the
dishwasher by pressing the On/Off push button. The On/Off indicator light comes
on. At the same time, the indicator lights of the function push buttons 1 and 2
start flashing.
3. Press the function push button 2, the correspondent indicator light keeps
flashing while the indicator light of the function push button 1 turns off. At the
same time the indicator light "end of programme" starts to flash.
4. Press the function push button 2 again, the "end of programme" indicator light
turns off, this means that the rinse aid indicator light has been deactivated.
5. To memorise the operation, switch off the dishwasher by pressing the On/Off
push button.
To reactivate the rinse aid indicator light follow the same process until the "end of
programme" indicator light starts to flash.
152968 86/0en/UK 11-07-2003 14:44 Pagina 14