Filter
Top Products
18
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load
them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed
as follows:
1. Move the front runner stops (A) of the
upper basket outwards and slide the
basket out.
2. Refit the basket in the higher position
and replace the stops (A) in their
original position.
Attention!
When the top basket is in the higher position it will only take plates up to 20
cm in diameter and you will not be able to use the cup racks.
After loading your machine always close the door, as an open door
can be a hazard.
RC01
Before closing the door, ensure that the spray arms can rotate freely.
152968 86/0en/UK 11-07-2003 14:44 Pagina 18