Filter
Top Products
Installation and Connection Instructions
43
INSTALLATION AND CONNECTION
INSTRUCTIONS
Installing the Dishwasher
• The dishwasher must be installed on a firm floor and adjusted to
ensure that it is stable and level.
• To compensate for unevenness in the
floor and to match the height of the
appliance to that of surrounding units
extend the threaded feet by unscrew-
ing:
– use a screwdriver.
• For built-in, integrated and fully inte-
grated dishwashers, the rear feet
should be adjusted from the front of
the appliance using a screwdriver.
• The drain hose, inlet hose and mains
cable must not be kinked or crushed
when the dishwasher is in position.
• In addition, the dishwasher must be firmly screwed to the work sur-
face or to the neighbouring units. This is essential to ensure the dish-
washer does not tip.
Fitting the Furniture Door Panel
(see installation template supplied)
3
The door of the appliance can be fitted with a furniture door panel of
the following dimensions:
Width: 591 mm – 594 mm
Thickness: 16 mm – 24 mm
Height: max. 715 mm
Weight: max. 10 kg