Filter
Top Products
Installation and Connection Instructions
45
3
The following section is only applicable to dishwashers that have a
safety valve on the threaded hose fitting for the tap:
Water inlet hose with safety valve
After connecting the double-walled water inlet hose, the safety valve is
next to the tap. Therefore the water inlet hose is only under pressure
while the water is running. If the water inlet hose starts to leak during
this operation, the safety valve cuts off the running water and the
draining pump in the dishwasher is switched on.
1
Please take care when installing the water inlet hose:
– The electrical cable for the safety valve is in the double-walled water
inlet hose. Do not immerse the water inlet hose or the safety valve in
water.
– If the water inlet hose or the safety valve is damaged, remove the
mains plug immediately.
– A water inlet hose with safety valve must only be replaced by your
local Service Force Centre.