Filter
Top Products
30
TO SAVE: Press ‘ENTER’ to set this position as end point and escape joystick
mode.
DIRECTION
Rotational direction of dome camera.
SPEED
AUTOPAN function will rotate camera with this speed.
RUN AUTOPAN
Execute AUTOPAN function.
EXIT
Quit the AUTOPAN menu.
15. CRUISE
Cruise parameters can be set on this page.
RECORD START
Command dome to start to record “CRUISE PATH”.
STEP1: Press ‘ENTER’ to go into joystick mode. Dome will move blink words to
‘RECORD END’ automatically.
STEP2: User can move camera to form a path.
STEP3: Press ‘ENTER’ to save the path.
RECORD END
Command dome to stop to record “CRUISE PATH”.
RUN CRUISE
Execute “CRUISE” function.
EXIT
Quit the CRUISE menu.
16. IR FUNCTION
“IR Cut Filter” function can be set on this page.
AUTO
THRESHOLD: The Internal circuit will decide to remove the “IR Cut Filter”
according to its threshold value. You can set the sensitivity as high
then dome will remove the filter immediately if the threshold value
is reached. Of course, low sensitivity can improve the reliability of
lens.
IR COLOR: You can program the video output as color or B/W when IR
function is enabled.
ON
Turn on IR function.
17. WDR SETTING
The parameter of WDR (Wide Dynamic Range) function can be set on this page.
WDR SWITCH
You can turn on/off the WDR function.