Filter
Top Products
7
QUICK START FROM ESD-CC1 KEYBOARD
Please press <DOME> button and enter the ID of dome to start to control the selected
dome camera.
■ Preset Function Operation
■ Setting
Press a number key for preset point such as <2>. Press <SET PRESET> to
record this position as preset point 2.
■ Recall preset position
Press a number key for preset point such as <2>. Press <GO PRESET> to go to
the preset position 2.
■ Auto-Pan Function Operation
■ Setting
1. Press <AutoPan> to entering Auto-Pan mode. The LCD on keyboard will
display “1.RUN 2.SETTING”.
2. Press <2> to edit parameters of Auto-Pan.
3. Move dome camera to a specific position and press <ENTER> to save it as
start point of scan region.
4. Pan dome camera to another position and press <ENTER> to save it as
end point of scan region.
5. Using direction key to select the scan direction what you want. Press
<ENTER> to confirm this selection.
6. Using direction key to select speed of Auto-Pan. Press <ENTER> to confirm
this selection.
■ Execute Auto-Pan function
1. Press <AutoPan> to entering Auto-Pan mode. The LCD on keyboard will
display “1.RUN 2.SETTING”.
2. Press <1> to execute Auto-Pan function.
■ Sequence Function Operation
■ Setting