Filter
Top Products
10
Electronic Display
The Electronic Display has a number of functions. It
shows:
· The time for each wash program selected.
Each time you change the wash program, the
number in the Electronic Display will change to
indicate the approximate duration of each wash
program. The min symbol will flash until a
wash program has started.
· Time remaining in the wash program.
This is shown with the background in green.
When the wash program has started, it will count
down in one minute increments, represented
by the min symbol. The min symbol will
remain and the smiley face symbol will flash.
· Delay Start.
An orange background is shown. It will count
down in one hour increments when delay start
has been selected. The HRS DELAY symbol
represents the number of hours before the
DishDrawer starts.
· Lock has been activated.
The key symbol will be shown at the bottom of
the Electronic Display.
· A Fault Code.
In the unlikely event of a failure, a fault code is
displayed and the background is red. (For more
information Refer to Section on Fault Code
Displays.)
· Water heating is in progress.
The HE symbol is displayed. This means that
water heating is in progress due to incoming
water being too cold, a drop in temperature
through the DishDrawer being opened during
the wash program, or the correct wash
temperature not having been reached. The wash
program times on the Electronic Display are
based on inlet water temperatures at 120°F.
Figure 3 - Electronic
Display showing Time
Remaining in a wash
program
Figure 4 - Electronic
Display showing a Fault
Code