Filter
Top Products
13
OPERATING INSTRUCTIONS
1. Ensure the filter plate and drain filter is clean and free of food debris. Check the
drain filter is flush with the filter plate and the spray arm is correctly on the
impeller.
2. Check there is rinse agent in the dispenser.
3. Remove all food scraps from the dishes.
4. Load the dishes. Overcrowding the DishDrawer may lead to poor wash
performance. Ensure there are no items blocking the spray arm path.
5. Pour detergent into the detergent dispenser, then close the dispenser door.
Use the steps on the detergent dispenser as a guide to the correct amount of
detergent to use. Where the detergent manufacturer has made recommendations
on quantities, we suggest you follow their instruction.
6. Select the wash program on the secondary control panel. Touch the Program
button until the desired wash program light shows on the panel. The wash
program has now been selected.
7. Select Eco Save (Optional)
If you would like the wash program to use less energy and time, Eco Save should
be selected by touching this button. The wash program light will be green.
8. Close the drawer.
9. Delay Start (Optional). If you wish to delay the start time, hold the Start / Pause
button until the Electronic Display background has changed to an orange
color and the HRS DELAY symbol comes on. Select the delay time required
and the DishDrawer will start when the time has elapsed.
10. Start the Wash Program. Press the Start / Pause button to start the DishDrawer.
To pause the DishDrawer, press the Start / Pause button and wait for the two
additional beeps before opening. The min symbol displayed in the
Electronic Display will flash, and the smiley face symbol will disappear.
11. At the end of the program, the display will show no background light. The
symbols 00 and the "smiley face" will be displayed on the Electronic Display.
The DishDrawer will beep six times to let you know that it has finished. At the
end of a wash program it is normal to find some water in the drain filter area and
the drying fan will be on for a period of time or until the drawer is opened.
While the fan continues to be on, it assists with the drying and uses negligible
amounts of energy.
In the event of a power failure, the DishDrawer will stop until the supply power is
resumed. It will drain the water in the DishDrawer and restart in the same part of the
wash program it was in when the power failed.