Filter
Top Products
33
FAULT CODE DISPLAYS
FAULT POSSIBLE CAUSE WHAT CAN BE DONE
CODE
U2 Drawer Opened during wash Press the Power button to clear the
fault. Always press the Start / Pause
button before opening the drawer if
the wash is in progress.
U3 Drain pump blocked Ensure the motor assembly is free of
foreign matter. Refer to Section on
User Maintenance Instruction.
Incorrect Installation Check the installation to ensure the
drain hose(s) are not kinked.
Incorrect water pressure Change the water pressure setting to
setting.
"HP". Refer to Section on Option
Adjustment Mode.
F1 Flood switch has been Turn the water faucet and the mains
activated power off to the DishDrawer and call
your Fisher & Paykel Authorized
Service Agent.
F2 Motor problem Check the motor assembly for foreign
material.
Excessive foam. Refer to Section on
Problem Solver.
Motor Assembly incorrectly Check the motor assembly is correctly
installed. installed. Care should be taken to
ensure the filter plate and spray arm is
correctly assembled. Refer to Section
on User Maintenance Instruction.
F3 Water temperature greater Ensure the inlet water supply is not
than 175°F greater than 150°F.
Temperature sensor has failed Call your Fisher & Paykel Authorized
Service Agent.