Filter
Top Products
18
The CookSurface has three pre-set sound preference settings (tones, tone volume, feedback
tones).
Changing the settings
To change the settings, follow these steps.
1
Hold down the on/off power button
for two seconds. This sets the
keylock.
Once you are in the Sound preference
mode, the on/off light will flash every
second and the burners’ pan supports
will rise. The keylock light will go out.
Turn the dial clockwise to highlight the
first setting. The other two lights will be
dimmed.
...3 seconds
...2 seconds
Sound preference settings
3
Each setting has two options (see table
following). Turn the dial to highlight each
setting.
2
Firmly press both the on/off power button
and the nearest burner control dial for three
seconds.
US
CA