Filter
Top Products
599464
15
4.2
Hardware Output Test Mode
Press and hold KEYLOCK, then START/PAUSE for 5 seconds.
All LEDs & LCD segments except Keylock are illuminated.
Press POWER once.
“HO” will show in the display (integrated and flat door models: Heavy,
Normal, Fast, Delicate, Rinse LEDs showing).
Press START/PAUSE.
Scroll through the following outputs using Start/Pause. Turn the outputs on
& off using Keylock button.
Press POWER to exit.
Note: Scrubbing brush symbol = output on, no scrubbing brush = output off
(on integrated and flat door models a green LED above the start/pause
button is used in place of the scrubbing brush).
LCD Norm Fast Deli Rinse Hardware Output
Display LED LED LED LED
bL Off Off Off
On
Backlight
Er Off Off
On
Off Element Relay
Ld Off Off
On
On
Lid Motors (will run for 10
seconds)
dd Off
On
Off Off Detergent Diverter Valve
FU Off
On
Off
On
Fill Water Valve
P1 Off
On
On
Off
Motor Wash direction (2300-
2850 rpm)
P2 Off
On
On On
Motor Drain direction (4200
rpm)
rd
On
Off Off Off
Rinse Aid Dispenser
(dispenses current setting)
dF
On
Off Off
On
Drying fan
LE
On
Off
On
Off Rinse Aid LED
C1
On
Off
On On
Water Softener Diverter
Valve
C2
On
On
Off Off Water Softener Brine Pump
C3
On
On
Off
On
Water Softener Brine Valve
°C
On
On On
Off
Displays current water
temperature.
°E
On
On On On
Displays controller rail
voltage
Tub Home Sensor test:- Keylock symbol on = tub closed, off = tub open