Filter
Top Products
29
Using your ice maker (Ice & Water models only)
Information about your ice maker
Your automatic ice maker will produce approximately eight cubes of ice every 3 – 4 hours,
depending on the freezer compartment temperature and the number of door openings.
When the ICE BOOST function is activated, ice production will increase up to 25% from standard
ice making.
The ice cube tray will fill with water.
When cubes are frozen, they will be ejected from the ice tray into the ice storage bin.
Ice making will continue until the storage bin is full.
Ice making will resume once you start to use the stored ice.
Your Ice & Water product comes with a smaller ice bin inside the larger freezer bin. Attached to the
ice storage bin is the hygienic scoop for the ice. This scoop provides hygienic access to the ice.
If a large amount of ice is required, remove an ice storage bin and allow ice to fall into the larger bin.
For maximum ice storage, level the stored cubes with the ice scoop.
If ice is not used often, old cubes will become cloudy, taste stale, will shrink and may stick
together. Empty the ice storage bin periodically and wash in lukewarm water. Dry thoroughly and
place back into the correct position.
Ice boost function
This function is designed to be used for times when you require more ice eg when you are having
a party. The ICE BOOST function will increase ice production up to 30% from standard ice making
and deactivate automatically after 24 hours.
When you first turn your ice maker on, the ICE BOOST function will be off.
To turn this function on, press the button. The light above the button will be illuminated
when the ICE BOOST function is on.
The ICE BOOST function is paused once your ice bin is full.
To manually deactivate this feature press the button again. The light above the button
will be off when the ICE BOOST function is off.
Activating the ICE BOOST function will automatically turn ice making on.
Deactivating ice making will automatically deactivate the ICE BOOST function.
Important!
Avoid contact with the moving parts of the ice maker ejector mechanism, and do not place your
fingers on the automatic ice making mechanism while the refrigerator is in operation.
Do not use ice cubes that may have become discolored, usually with a green-blue color. If such
discoloration is noted, discard the ice cubes and contact your Fisher&Paykel Authorized Service
Agent.
Ensure the ice maker is connected to the filter and to a drinkable water supply only.
Installation of the water connection to the ice maker must be completed by a qualified service
technician or a qualified plumber (see installation instructions).
For manual ice making please refer to page 32.
US
CA