Filter
Top Products
30
Care and cleaning
Replacing the fuse in the side-mounted power outlets (some models only)
The two side-mounted power outlets (some models only) are
internally fused with one 16 A fuse. Be careful not to overload
them as this will blow the fuse.
Important!
The power socket outlets on these cookers are rated at 250V 10A AC only.
If required, the fuse can be replaced by following these steps:
1
Turn the power to the cooker off at the wall.
2
Unscrew the anti-tip brackets, then pull the cooker out from
the wall, so the back fuse cover on the right-hand side is accessible.
3
Remove the screw holding the fuse cover in place and remove the
fuse cover.
4
Open the fuse housing, as shown, and remove the blown fuse
cartridge.
5
Slide in the replacement fuse cartridge. Ensure that it is rated
16 A. (Two replacement fuse cartridges are supplied with the
cooker.)
6
Close the fuse housing.
7
Refit the fuse cover.
8
Push the cooker back into position.
9
Refit the anti-tip brackets.
10
Turn the power to the cooker back on at the wall and set the clock.
WARNING!
Electrical Shock Hazard
Before accessing the fuse, ensure that
the cooker has been disconnected
from the power supply.
Failure to do so could result in death or
electric shock.
WARNING!
Tipping Hazard
All cookers can tip. Keep children away and take care. The anti-tip brackets
supplied must be installed.
Failure to follow these instructions could result in injury.