Filter
Top Products
41
Care and cleaning
Cleaning the inside of your oven
Note: if using the Self Clean function remove all shelves and side racks first. See ‘Using the Self
Clean function’.
Do not use abrasive cleaners, cloths or pads to clean the enamel.
Removing the side racks
1
Using a small coin or a flat-head screwdriver, loosen and remove the front fixing screw.
2
Slide the side rack clear of the rear lock stud and remove.
Refitting the side racks
3
Slide the side rack gently so it engages with the rear lock stud. Make sure that they are the right
way up, as in the illustrations, and then insert and tighten the front fixing screw.
4
If not already fitted, fit the telescopic sliding shelf supports. See “Care and cleaning’ for
instructions.
Fig. 35 Removing the side racks