Filter
Top Products
EN
14
Installation instructions
Moving your refrigerator
Turn off the appliance and unplug from the power point. Remove all food. Disconnect water
supply if connected.
Turn the adjustable leveling feet to the right as far as they will turn (refer to page 10).
Ease the refrigerator out of its position. Tuck the power cord away, tape the doors closed and
tape the shelves in place. If the cabinet needs to be placed at an angle or laid down, carefully lay
it on its side (the right hand side when viewed from the front).
Relocate and install. If the appliance has been left on its side for any length of time, leave it
standing upright for at least 10 minutes before turning on.
Storing your refrigerator or freezer
When storing your cleaned appliance, leave the doors open. This allows air to circulate and
prevents the build up of bacteria and moulds.
Before using again, clean well using a mixture of warm water and baking soda (add 1 teaspoon
of baking soda to each 1 pint (500 ml) of water). Rinse with clean water.
Holiday time
We recommend you leave your refrigerator operating while you are on holiday.
The Active Smart™ system that controls your product is highly intelligent. It automatically senses
how often and how much you use it, and regulates its power consumption accordingly.