21
Broil
Clean
Setting Wall Oven Controls
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL
Broil
and CLEAN
Clean
pads control the Fahrenheit or Celsius temperature display modes. The oven control
can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display
in Fahrenheit.
for 7seconds
START
or
Clear
/Off
INSTRUCTIONS PRESS DISPLAY
Consumer Defined Controls (continued)
Figure 1
Figure 2
Figure 3
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
Broil
(Figure 1) and hold for 7 seconds; "550°" will appear and "BROIL"
will flash in the display and a beep will sound. If "F" appears, the
display is set to show temperatures in Fahrenheit (Figure 2). If "C"
appears, the display is set to show temperatures in Celsius
(Figure 3).
2. Press
Clean
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press
START
to accept the change or press
Clear
/Off
to reject the
change.