Frigidaire Electric Microwave / Wall Oven Combination Oven User Manual


 
36
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Wall Oven Self-Cleaning Cycle
The SPEED CLEAN
Speed
clean
, CLEAN
Clean
, MAXX CLEAN
Maxx
clean
and START TIME
Start
time
pads controls the Delayed Self-Clean
operation. The automatic timer will turn the oven on and off at the time you select in advance. Be sure to review TO START
THE SELF-CLEAN CYCLE for recommended clean times.
To Start the delayed Self-Clean Cycle
INSTRUCTIONS PRESS DISPLAY
To set the control for the Self-Cleaning Cycle to start
at a delayed time and shut off automatically (example:
3 hour self-clean cycle to start at 4:30)
1. Be sure the clock is set with the correct time of day and the oven
door is closed.
2. Press
Clean
. "CLEAN" will flash and "3:00" HR will show in the
display (Figure 1). The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). Note: If a 2 or 4 hour clean
time is desired, press
Speed
clean
for 2 hour or press
Maxx
clean
for a 4 hour clean
time. Set the cleaning time based on the amount of soil—light,
medium or heavy (*See previous page).
3. Press
START
.The "DOOR LOCKED" icon will flash; "CLEAN" icon
and the letters "CLn" will remain on in the display (Figure 2).
4. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will quit flashing and remain on.
5. Press
Start
time
. Enter the desired start time using the number pads
4
3
0
(Figure 3).
6. Press
START
. The "CLn" icon will turn off; "DELAY", "DOOR
LOCKED" and "CLEAN" icons will remain on (Figure 4).
7. The control will start the self-cleaning at the set start time, for the period
of time previously selected. At that time, the icon "DELAY" will go out;
"CLn" and oven icon will appear in the display (Figure 5).
When the Self-Clean Cycle is Completed
1. The time of day, "END", "DOOR LOCKED" and "CLEAN" will
remain in the display (Figure 6).
2. Once the oven has cooled down for approximately 1 HOUR, and
"DOOR LOCKED" is no longer displayed, the oven door can then
be opened (Figure 7).
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to
excessive smoke or fire in the oven:
1. Press
Clear
/Off
.
2. Once the oven has cooled down for approximately 1 HOUR and
"DOOR LOCKED" is no longer displayed, the oven door can then
be opened (Figure 8).
Note: Self-Clean cycle can never be set to start more than 12 hours in
advance.
Clean
Speed
clean
or
Maxx
clean
START
Start
time
4
3
0
START
Figure 8
Clear
/Off
Clean