Open as PDF
* Sanitize Option
* Includes dry time
Select HEAVY WASH/POTS &
PANS and desired OPTIONS.
HI-TEMP WASH will
automatically be provided,
For pots, pans, casseroles and
dried-on or baked-on soils.
To Select Cycle
Heavy Wash/Pots & Pans
Select NORMAL WASH and
desired OPTIONS. Selecting
HI-TEMP ON or SANITIZE will
result in a Longer cycle.
For regularly soiled dishes
Select TOP RACK and desired
For lightly soiled or pre-rinsed
dishes and silverware when you
do not have a full load.
Select RINSE ONLY.
DO NOT USE detergent.
For rinsing dishes that will be
Light Wash/Eco Wash
For Lightly soiled and pre-rinsed
dishes and silverware.
Select LIGHT WASH/ECO
WASH and desired OPTIONS.
To sanitize your dishes and glassware, select the
SANITIZE option. When selected, the light above the pad
will come on and remain on until end of cycle. The water
temperature in the final rinse will be raised to 155°F
(68°C) and will maintain that temperature for 9 minutes.
This option is available in Heavy and Normal Wash cycles.
Only these sanitization cycles have been designed to meet
The cycle time will be extended until the proper water
temperature is reached.
Washing action will continue
during the water heating delay. For best results, the
incoming water temperature should be at least 120°F
The sanitize criteria may not be satisfied if there is an
interruption of the cycle, power failure or if the incoming
water temperature is below 120°F (49°C).
To turn off the SANITIZE option, press the pad a second
time. The light above the pad will turn off.
* Status Indicator Lights
The WASHING light comes on at the beginning of cycle
and remains on until the end of the main wash.
The DRYING light indicates the drying portion of the cycle.
The light will come on when either drying option is
When the SANITIZE option is selected, the SANITIZED light
will glow when the SANITIZE cycle is finished. If the
dishwasher did not properly sanitize the dishes, the light
will not come on. This can happen if the cycle is
interrupted. The light will remain on until the door is
The CLEAN light will come on at end of cycle and remain
on until door is opened.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press
START/CANCEL pad and the dishwasher will start a 90
second drain. At the end of the drain, select the desired