Frymaster 45 Fryer User Manual


  Open as PDF
of 80
 
1-3
After servicing is complete:
5. Return the fryer to its original location, reconnect the unit to the gas supply, and open the gas supply
valve. Be sure to reattach all restraining devices and plug in all electrical cords.
6. Rellthefryerwithoil.
1.3 Diagnostic Procedures
1.3.1 Cleaning the Gas Valve Vent Tube
1. Carefullyunscrewtheventtubefromthegasvalve.
NOTE:Straightentheventtubeforeasyremoval.
2. Pass a piece of binding wire (.052-inch diameter) or equivalent through the tube to remove
obstructions.
3. Removethewireandblowthroughthetubetoensurethatitisclear.
4. Reinstallthetubeandbenditsothattheopeningispointingdown.
1.3.2 Checking the Burner Manifold Gas Pressure
1. EnsurethatthegasvalveknoborbuttonisintheOFF
position.
2. Removethepressuretapplugfromtheendofthemanifold.
3. Connectamanometerorpressuregaugetotheport.
4. PlacethegasvalveinthePILOTpositionandlight.Whentheburnerlightsandcontinuestoburn,
notethegaspressurereadingandcompareittotheaccompanyingtables.
To adjust burner gas pressure:
5. Onnon-CEvalves,removethecapfromtheregulatoradjustmentscrew.
6. Onallunits,increasethesettingonthethermostatuntiltheburnercomeson.
7. Monitorthegaspressurereadingonthemanometerorpressuregauge.
Remove this plug and
connect a manometer or
pressure gauge to the
port.
WARNING
The frypot must be lled
with oil or water during this
procedure.
 previous next