Frymaster 819-6213 Fryer User Manual


 
HCP
10-2
10.2 Loading Software on Palm
These instructions assume Palm desktop software is installed on your computer and a Palm with an
operating system of 4.0 or higher is attached to the computer. Some familiarity with the Palm
desktop software is also necessary. See the Palm manual for instructions on installing, operating and
deleting software from the Palm. Failed or outmoded HCP software must be removed from the Palm
Pilot before new HCP software can be installed.
Step 1: Install the HCP
software CD on your computer
and copy the compressed
HCP file to your desktop.
Step 2: A self-extracting dialog box
will be displayed. The Unzip to folder
in the dialog box should show your
Palm add-on folder as the site it will
be saved. If not, click the Browse
button and navigate to that folder.
The Palm folder should be on your C
drive and can be stored in the
C:\Program Files directory. The Add-
on folder is in the Palm folder. With
the Unzip to folder showing the Palm
Add-on folder, click Unzip.
Step 1: A dialog box
showing a successful
extraction will be displayed.
Step 4: Open the Palm Desktop software by
clicking on the icon on your computer's
desktop and click the Quick Install button. See
Arrow.
Step 5: The Install Tool is displayed. Click the
Add button.