Filter
Top Products
How to Use the
~nute/Second
~mer
The MN/SEC
T~R
has three
timing functions:
c
It operates as a minute timer.
●
It can be set to delay cooking.
●
It can be used as a hold setting
after defrosting.
The MIN/SEC TIMER operates
without microwave energy.
How to
tie
a
3-Mnute
none
Call
1. Touch MIN/SEC TIMER pad.
The display shows “: O“ and
“ENTER TIME” flashes.
2. Touch number pads 3,0 and O
(for 3 minutes and no seconds).
Display shows “3:00” and “TIME”
flashes.
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes
“End’j and display shows
time of day.
~ogrming
a Holding
me
The Minute/Second Timer can
dso
be used to program “hold
time” between microwave cooking
functions. The time can range from
one second to 99 minutes and
99
seconds. A HOLD or “standing”
time may be requested in some of
your own recipes or cooking guide.
Rog
~ing
Delayed
Cooking
To delay cooking up to 99 minutes
and 99 seconds, touch TIME
COOK I and enter cooking time.
Then, touch MIN/SEC TIMER
and enter number of minutes to
delay cooking. Press START.
How tome Defrost, Hold
and
We
Cook
bt’s say you want to
debst
a frozen
casserole for 15 minutes, hold for
10 minutes and then Time Cook for
25 minutes. Here’s how to do it:
Step 1:
Take casserole from freezer
and place in oven.
Step2:
Touch TIME DEFROST pad.
The display shows “: O“ and
“ENTER DEF TIME” flashes.
Step 3:
Touch pads 1,5,0 and O for
B
minutes defrosting time.
“ti:OO”
appears on display. (Defrosting is
automatically set on power level 3
but can be changed by touching the
POWER LEVEL pad and the
desired power level.)
Step 4:
Set standing or hold time
by touching MIN/SEC TIMER.
The display shows “: O“ and
“ENTER TIME” flashes.
Step 5:
Touch 1,0,0 and O to hold
for ten minutes.
“10:00”
appears on
display and “TIME” flashes.
Step
6: Touch TIME COOK I
pad. The display shows “: O“ and
“ENTER 1 COOK TIME” flashes.
Step
7:
Touch 2,5,0 and O for
twenty-five minutes of cooking
time. “1 COOK TIME” flashes
and
“25:00”
appears on display.
Step
8: Touch START.
“DEF
TIME” and
“E:OO”
counting down
show on display. As each function
is automatically performed, oven
display shows instructions entered
and the function.
Step 9:
When time is up, the oven
signals and flashes
“End~’
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q.
Can I defrost and hold only?
A. Yes.
Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in Time Defrost and
amount of time. Then program
hold and the amount of time. Be
sure to put the thawed dish in the
refrigerator promptly.
N~E:
Let foods remain at room
temperature only as long as safe.
Times will vary.
Q.
I programmed my oven for a
specific defrosting time but it
defrosted longer than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. You may have set the
oven to defrost for 4 minutes, hold
for 2 minutes, and then defrost for
6 minutes. In this case, the oven
would defrost for 6 minutes and
hold for 2 minutes.
8