GE 24 CustomStyle Refrigerator User Manual


 
24
Customer Service Troubleshooting Tips
Operating Instructions
Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Customer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Inserting the door panels.
Install the Side Trim.
These pieces are tucked inside the fresh food door
handle.
Do not remove the protective film on the outside of the
Side Trim until the Side Trim is installed.
Fit the bottom of the Side Trim under the Bottom
Trim as illustrated.
Hold the Side Trim against the front face of the
decorator panels and fit the Side Trim under
the Top Trim. Make sure the Side Trim is fitted
correctly and that you are satisfied with the
appearance of all the parts before pulling the
tape liner.
Secure the Side Trim.
Place one hand between the two pieces of tape liner
and hold the Side Trim firmly against the panels
and the side of the door.
Pull the top tape liner up about 3 (80 mm),
pressing the trim with your hand as the adhesive
is exposed to the door. Then pull the bottom
tape liner down about 3 (80 mm). Follow the tape
with your hand, pressing the trim adhesive against
the door.
Continue pulling the tape liner loose, alternating
between the top and bottom and pressing the Side
Trim against the door.
Remove the Protective Film From the Outside of the Side Trim.
Side
Trim
Side
Trim
Bottom Trim
Tape
Liner
Tape
Liner
Top Trim