Filter
Top Products
~
———
—–—
—.
=
=–
Questions?
———
——––
–=—
–—
––——
—–—
—–
Use This Problem Solver
———
PROBLEM
OVEN WILL NOT
WORK
OVEN LIGHT
DOES NOT WORK
FOOD DOES NOT
BROIL PROPERLY
FOOD DOES NOT
ROAST OR BAKE
PROPERLY
CALROD “ SURFACE
~]NITS
NO’T
FUNCTIONING
PROPERLY
OVEN WILL NOT
SELF-CLEAN
OVEN DOOR
WON’T LATCH
POSSIBLE CAUSE AND REMEDY
● Plug on range is not completely inserted in the electrical outlet.
c
The circuit breaker in your house has been tripped, or a fuse has been blown.
● Oven controls not properly set.
● Door left in locked position after cleaning.
. Light bulb is loose.
●
Bulb
is defective. Replace.
. Switch operating oven light is broken. Call for service.
● OVEN SET knob not set at BROIL.
“
OVEN TEMP knob not set at BROIL.
. Door not left ajar as recommended.
. Improper shelf position being used. Check Broiling Guide.
● Necessary preheating was not done.
. Food is being cooked on hot pan.
● Cookware is not suited for broiling.
● Aluminum foil used on the broil pan rack has not been fitted
recommended.
properly and slit as
● OVEN SET knob not set on BAKE.
● OVEN TEMP knob not set correctly.
. Shelf position is incorrect. Check Roasting or Baking Guides.
. Oven shelf is not level.
● Incorrect cookware or cookware of improper size is being used.
. A foil tent was not used when needed to slow down browning during roasting.
“
Surface units are not plugged in solidly.
● Trim rings/drip pans are not set securely in the range top.
● Surface unit controls are not properly set.
“
Automatic timer dials not set or not set properly. Clock must be set to time of day and
the STOP TIME dial must be set and advanced beyond the time noted on oven clock.
● The STOP TIME dial was not advanced for long enough.
● Both OVEN SET and OVEN TEMP knobs must be set at CLEAN setting.
c
During the self-cleaning function, a thick pile of
spillover
in the oven can leave a
heavy layer of ash that can insulate the area from further heat.
● Latch handle not moved to the right.
. Oven may be too hot from previous use. Open oven door to cool oven. When oven
has cooled, latch handle can again be moved.
● OVEN SET knob must be at CLEAN or OFF before latch handle can be moved.
If
you
need more help... call, toll free:
GE
Answer
Center
800.626.2000”
consumer information service
26
— —.