GE JDP36GP Range User Manual


 
How to Set Oven for Cleaning
1. Follow steps to prepare the oven for cleaning.
2. Close the oven door.
(—]
3.
press the CLEAN pad.
II
CLEAN
L
J
4. Press the INCREASE or DECREASE pad until the
desired Clean Time is displayed.
Clean Time is normally 3 hours. You can change the
Clean Time to anywhere between 2 and 4 hours,
depending on how dirty the oven is.
The self-clean cycle will automatically begin after
“CLEAN” is displayed. The words “ON” and “LOCK”
will appear on the display. It will not be possible to
open the oven door until the temperature drops below
the lock temperature and the LOCK light goes off.
When the clean cycle is finished, the word “CLEAN”
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below the
locking temperature, the word “LOCK” goes out and
the door can be opened.
5. When the LOCK light is off, open the door.
NOTE: A fan may automatically turn on to cool
internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
How to Delay Start of Cleaning
Quick Reminder:
1. Prepare the oven for cleaning.
2. Close the oven door completely.
3. Press the CLEAN pad.
4. Press the INCREASE or DECREASE pad until
the desired Clean Time appears..
5. Press STOP TIME pad.
6. Press the INCREASE or DECREASE pad until
the desired Stop Time appears in the display.
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning make sure the oven clock
shows the correct time of day.
For example:
Let’s say it’s
7:00
and you want the
oven to begin self-cleaning at
9:00
after you’re
finished in-the kitchen.
Th~
oven is just
shiled
a normal
amount so the normal Clean Time of 3 hours is preferred.
1. Prepare the oven for cleaning.
2. Close the oven door.
(—]
3.
pressthecLEAN@.
II
CLEAN
c1
6. Press the STOP TIME pad.
“10:00”
STOP
appears in the display and “STOP
TIME
TIME” flashes. The control
automatically sets Stop Time by adding
the Clean Time to the time of day. In this
example, the time of day is
7:00
and the
Clean Time is 3 hours. Adding 3 hours
to the time of day equals
10:00.
7. Change the Stop Time from
10:00
to
12:00
by
pressing the INCREASE pad until
“12:00”
appears
in the display. The words “DELAY CLEAN” will
also appear in the display.
The self-clean cycle will automatically begin at
9:00
and finish at
12:00.
The word “ON” will appear on
the display at
9:00.
When the oven heats to a high temperature, the word
“LOCK” will be displayed. It will not be possible to
open the oven door until the temperature drops below
the lock temperature.
When the clean cycle is finished, the word “CLEAN”
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below the
locking temperature, the word “LOCK” goes out and
the door can be opened.
8. When the LOCK light is off open the door.
(continued next
page)
4. Press the INCREASE pad. Three hours
cleaning time is automatically set.
5. If a longer or shorter Clean Time
is desired, press the INCREASE or
DECREASE pad
until
the desired
Clean Time is displayed.