GE JDP36GP Range User Manual


 
THE PROBLEM SOLVER
(continued)
PROBLEM
TVEN
WILL NOT
SELF-CLEAN
OVEN NOT CLEAN AFTER
CLEAN CYCLE
“BURNING” OR “OILY”
ODOR EMITTING FROM
OVEN WHEN TURNED
ON
POSSIBLE CAUSE
Stop Time must be more than 3 hours later than Start Time.
Oven temperature is too high to set self-clean operation. Allow the range to
cool to room temperature and reset the controls.
Oven controls not set properly.
Heavily soiled ovens require a 3%-4 hour clean time.
Heavy
spillovers
should be cleaned up before starting the clean cycle.
This is normal in a new oven and will dissipate in time. To speed the process,
set a self-clean cycle
)see
the Operating the Self-Cleaning Oven section)
lasting a minimum of 3 hours.
If you need more help...call, toll free:
GE Answer Center”
800.626.2000
consumer information service
30