Filter
Top Products
—
PROBLEM
I
POSSIBLE CAUSE
“F-” AND A
NUM13ER
*
If the time display flashes “F-” and a number, you have a function error code.
FLASH ON DISPLAY
Press the CLEAR/OFF pad. Allow oven to cool for one hour. Put oven back
into operation. If the failure code repeats, disconnect all power to the range.
Call for service.
OVEN
WILL
● Plug on range is not completely inserted in the electrical outlet.
NOT WORK
● The circuit breaker in your house has been tripped, or a fuse has been blown.
I
*Ovencontrolsnotproperly set.
FOOD DOES NOT
*
Oven controls not properly set. See the Broiling section.
BROIL PROPERLY
●
Door not left ajar as recommended.
* Improper shelf position being used. See the Broiling section.
●
Food is being cooked on a hot pan.
●
Cookware is not suited for broiling.
●
Aluminum foil used on the broiler pan rack
has
not been fhted properly
and
sIit
as recommended.
FOOD DOES NOT
ROAST OR BAKE
PROPERLY
●
Oven controls are not properly set.
●
Shelf position is not correct.
●
Incorrect cookware or cookware of improper size is being used,
●
A foil tent was not used when needed to slow down browning during roasting.
OVEN LIGHT DOES
● Bulb mav be loose or burned out.
NOT COME ON
I
.
● Electrical plug must be plugged into a live power outlet.
I
OVEN TEMPERATURE ● Oven thermostat needs adjustment. See the Do
It
Yoursel~–Adjust
the
TOO HOT OR TOO COLD Oven Thermostat section.
CONTROL BEEPS AFTER
● This is reminding you to enter a bake temperature.
ENTERING OVEN TIME
ON STOP TIME
SURFACE UNITS
● Surface units are not plugged in solidly.
NOT FUNCTIONING
PROPERLY
● Surface unit controls are not properly set.
CLOCK AND TIMER
● Make sure the electrical plug is plugged into a live, properly grounded
DO NOT WORK
power outlet.
● Check for power outage.
(contin14ed
next
page)
29