GE JGBP26 Range User Manual


 
1.
CLEAWOFF.
Press this pad to cancel all oven
operations except clock and timer.
2. PROGRAM STATUS. Words light up in the
display to indicate what is in the time display.
Programmed information can be displayed at any
time by touching the pad of the operation you want
to see. For example, you can display the current
time of day while the timer is counting down by
pressing the CLOCK pad.
3. TIME DISPLAY. Shows the time of day, the times
set for the timer or automatic oven operation.
4. OVEN TEMPERATURE AND BROIL
DISPLAY. Shows the oven temperature or the
broil setting selected.
5. FUNCTION INDICATORS. Lights up to show
whether oven is in bake, broil or self-clean mode.
6. INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature by
larger amounts.
7. DECREASE. Short taps to this pad decrease the
time or temperature by small amounts. Press and
hold the pad to decrease the time or temperature by
larger amounts.
8. BAKE. Press this pad to select the bake function.
9. BROIL. Press this pad to select the broil function.
A ALA
10. CLEAN. Press this pad to select self-cleaning
function. See the Operating the
Self-Cleanin~
Oven section.
11. COOK TIME. Press this pad for Timed Baking
operations.
12. STOP TIME. Use this pad along with the COOK
TIME or CLEAN pad to set the oven to start
automatically at a time you select.
13. CLOCK. To set the clock, first press the CLOCK
pad. Then press the Increaser DECREASE
pad to change the time of day. Press the CLOCK
pad to start.
14. TIMER. Press this pad to select timer function.
The timer does not control oven operations. The
timer can time up to 9 hours and 55 minutes.
To set the timer, first press the TIMER pad. Then
press the INCREASE or DECREASE pad to
change the time.
To cancel the timer, press and hold the TIMER
pad until the word “TIMER” disappears from
the display.
lf
“F-
and a number” flash
in
the display and
the oven control signals, this indicates function
error code.
If the function error code appears
during the self-cleaning cycle, check the oven door
latch. The latch handle may have been moved, even
if only slightly, from the latched position. Make
sure the latch is moved to the right as far as it will
go. Press the
CLEAWOFF pad. Allow the oven to
cool for one hour. Put oven back into operation.
If the function error code repeats, disconnect power
to the range and call for service.
11