GE JGP336 Cooktop User Manual

For your safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Have the installer show you the location of the cooktop gas shut-off valve and how to shut it
off if necessary.
Have your cooktop installed and properly
grounded by a qualified installer, in
accordance with the Installation
Instructions. Any adjustment and service
should be performed only by qualified gas
cooktop installers or service technicians.
Do not attempt to repair or replace any
part of your cooktop unless it is specifically
recommended in this manual. All other
service should be referred to a qualified
Locate the cooktop out of kitchen traffic
path and out of drafty locations to prevent
pilot outage and poor air circulation.
Plug your cooktop into a 120-volt
grounded outlet only. Do not remove
the round grounding prong from the
plug. If in doubt about the grounding
of the home electrical system, it is your
personal responsibility and obligation to
have an ungrounded outlet replaced with
a properly grounded, three-prong outlet
in accordance with the National Electrical
Code. Do not use an extension cord with
this appliance.
Let the burner grates and other surfaces
cool before touching them or leaving
them where children can reach them.
Be sure all packaging materials are
removed from the cooktop before
operating it to prevent fire or smoke
damage should the packaging material
Be sure your cooktop is correctly
adjusted by a qualified service technician
or installer. This counter unit, as shipped
from the factory, can only be operated
with natural gas. Do not try to operate it
with LP (bottled) gas unless you follow the
Installation Instructions packed with your
cooktop. See LP Gas Adjustments.
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips
Consumer Support