Filter
Top Products
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Centigrade selections.
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 2 seconds until the
display shows
SF.
Touch the
BROIL HI/LO
pad. The
display will show
F
(Fahrenheit).
Touch the
BROIL HI/LO
pad again.
The display will show
C
(Centigrade).
Touch the
START
pad.
Changing the Speed of the +/– Pads
As you use the +/– pads when setting a time or
temperature, you may notice the display changes
slowly. This special feature allows you to change
the speed.
To set the speed you prefer, follow the
steps below:
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 2 seconds until the
display shows
SF.
Touch the
+
pad. The display will show
you a set speed between 1 and 5.
Touch the
+
pad to increase the speed
up to the number 5.
Touch the
–
pad to decrease the speed
down to the number 1.
Touch the
START
pad to activate the
setting and leave the control set in this
special features mode.
11
Operating Instructions
Safety Instructions
Customer Service
Troubleshooting Tips
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black-out the clock
display, follow the steps below:
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 2 seconds
until the display shows
SF.
Touch the
CLOCK
pad once. The
display will show
12 hr
.
Touch the
CLOCK
pad again to change
to the 24-hour military time clock. The
display will show
24 hr
.
Touch the
CLOCK
pad again to black-
out the clock display. The display will
show
OFF
.
Touch the
START
pad to activate your
choice and leave the control set in this
special features mode.
NOTE: If the clock is in the black-out mode you will
not be able to use the Delay Start function.
Control Lockout
Your control will allow you to lock out the touch
pads so they cannot be activated when touched.
To lock the controls:
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 2 seconds
until the display shows
SF
.
Touch the
SELF CLEAN
pad. The
display will show
LOC OFF
.
Touch the
SELF CLEAN
pad again.
The display will show
LOC
.
Touch the
START
pad to activate
the control lockout feature and
leave the control set in this special
features mode.
When this feature is on and the touch
pads are touched the control will beep
and the display will show
LOC
.
NOTE: The control lockout mode will not affect
the clock, timer and oven light touch pads.