Filter
Top Products
8
Operating Instructions Safety InstructionsCustomer Service Troubleshooting Tips
Using the clock and timer.
To Set the Clock
Touch the
CLOCK
pad.
Touch the
HOUR
and
MIN +/–
pads
to set the time of day.
Touch the
START
pad. This enters
the time and starts the clock.
To check the time of day when the
display is showing other information,
simply touch the
CLOCK
pad. The time of
day shows until another pad is touched.
Clock
The clock must be set for the automatic
oven timing functions to work properly.
The time of day clock
cannot
be changed
during Delay Start. (It can be changed
during a regular bake or broil operation.)
Timer
You may program the timer to time
cooking or other household activities for
up to 9 hours and 59 minutes.
The timer counts down in minutes,
1 minute at a time, until the last 60 seconds
are reached, then the control will beep one
time. The sections will not be displayed
until the last minute is reached.
When the timer reaches “:00”, the control
will beep 3 times followed by one beep
every 6 seconds until
KITCHEN TIMER
ON/OFF
is touched.
The 6-second tone can be canceled by
following the steps in the
Special Features
of Your Oven Control
section under Tones at
the End of a Timed Cycle.
How to Set the Timer
Touch the
KITCHEN TIMER ON/OFF
pad.
Touch the
HOUR
and
MIN +/–
pads
until the amount of time you want
shows in the display.
If you make a mistake, touch the
KITCHEN TIMER ON/OFF
pad and
begin again.
Touch the
START
pad.
After touching the
START
pad,
SET
disappears; this tells you the time is
counting down, although the display
does not change until one minute
has passed.
When time is up, the oven control
signals until you touch the
KITCHEN
TIMER ON/OFF
pad. Display then shows
the time of day.
NOTE: The minute timer is independent of all
the other functions and it does not control the
oven. The CLEAR/OFF pad does not affect
the timer.