Filter
Top Products
- d How toUse
WS3= Choking
Place covered food in oven. Touch
AUTO COOK pad. “Enter Code”
flashes on display.
ouch number pad for desired
ode. Code 2 shows and “Start”
flashes on display. Touch START.
Word AUTO shows on display,
indicating steam sensor is acti-
vated. DO NOT OPEN DOOR.
COOKING PERFORMANCE MAY
BE AFFECTED.
Beep sounds when steam is sensed
and AIJTO is replaced by cook
time. At this point, door may be
opened to check foods if desired.
When done, oven beepsand stops.
NOTE: Refer to Automatic Cooking
Chart on oven when door is open
and also on page 18of this book.
Auk
Cooking Codes &
Preference Control
Automatic cooking codes 1through
9 are designed to give you easy
automatic results with a number
of foods.
Codes are arranged in lowest to
highest amount of power. For
example, Code 1 gives least micro-
wave cooking power, Code 2 gives
more power than Code 1, Code 3
increasespower over Code 2 and
so on.
Code 1,which has the least power,
is used for quick reheating jobs
while the longer cooking foods like
stew or chili use higher codes. A
Cooking Chart and recipes, starting
on page 11 give many tested uses
for automatic cooking codes.
“
Another feature to give you more
flexibility in Automatic Cooking is
the preference control, which can
be used to “fine tune” the power
of Codes 2 through 9. By simply
adding a 1 after a Code, you can set
the oven to cook using 20°/0less
time than the code would regularly
deliver. For example, if Code 4
cooks your vegetables more done
than you like them, set Code 41
next time and you will get 20°/0less
cooking time.
Likewise, if you wish slightly more
time than a code delivers, add a 9
after the Code. For the vegetables
in the example above, Code 49
would provide 20°/0more time for
cooking than would the regular
Code 4.
Touch AUTO COOK Pad.“Enter
Code” flashes on display,
.—----..
-.
—
—
—.
—–
—
—-
-—.
—
—
—
—-
-—......
misi$%w.
—.
—.
—–
—–
—-
—
~
—
—–
——
—
—
—
—
—
—
—
—
—
—
—
——-
—
—.
~—
——
—
—
——
Touch number pads 4 and 1 in that
order, Code 4 shows and “Start”
flashes on disdav.
Touch START. AUTO shows on
display. If you wish to check foods,
open door after first oven signal.
Close door and touch START.