Filter
Top Products
1. Surface Unit Controls. Push in
to set Surface Units from WARM to
HIGH, grill or griddle. Left and
Right Front Controls operate Grill
and Griddle.
2. Indicator Light. Lights when
any unit of the cooktop is turned on.
3. Exhaust Fan Switch. The
exhaust fan will automatically
turn on when the grill, griddle, or
rotisserie modules are used. Manual
operation is required when other
modules are in use.
4. Surface Unit Module. The
entire module plugs into the
cooktop and can be easily removed
for cleaning.
5. Plug-In Surface Unit. Units
may be easily removed to clean
reflector pans beneath each coil.
Do not submerge plug-in units in
water.
6. Chrome-Plated Reflector Pan.
Used to catch
spillovers.
Remove
for cleaning.
7.
Vent System.
Blower vents
smoke down and out of kitchen and
house. Vent filters (located under
vent grill) should be cleaned often.
See page 16 for further explanation.
8. Grill Module. Entire module
removes easily. For assembly and
explanation of each part of grill,
see page 10.
9. Griddle.
Remove two grill grates
and place over heating element.
For further explanation of griddle
cooking, see page 13.
5